10-26-2007, 12:33 PM
If you are having a flickering screen problem with a few cameras on your DVR system, make sure you are using the correct power source. All of our cameras use AC 24V or DC 12V, and make sure your power supply systems are working correctly. Also the power current should be correct (on the wide-dynamic cameras, the camera current should be 1 amp).
If you are still having problems, if your camera has an OSD (on-screen display), try going in and resetting the camera to default. Then power off your power supply and turning it back on. This could fix the flickering screen problem.
If you are still having problems, if your camera has an OSD (on-screen display), try going in and resetting the camera to default. Then power off your power supply and turning it back on. This could fix the flickering screen problem.