DVR Security Forum

I have just installed the new Geovision 8.2 software with a GV-800 8port card and i am always getting a delayed write failure error on the partition that the video files are stored too. The hard drive is a 250 gig sata that is not out of space. I have 2 gigs of DDR2 memory and a gigabyte MB. All the parts i use are the same for all my DVRs and this one is the first with the problems. I have changed out memory and a new hard drive and they errors still occur. Any help would be appreciated.

Hello joesnipes,

Please know the delayed write failure error is a Windows
error that normally occurs when windows was not able
to properly transfer the file.

As various workaround can be found by searching Microsoft
knowledge database, (http://support.microsoft.com/search/defa...de=r&lsc=0)
You may also try out specific work around listed below.
----------------------------------------
1. http://support.microsoft.com/kb/330174/en-us
2. http://support.microsoft.com/kb/870894/en-us
3. http://support.microsoft.com/kb/818788/en-us
(please try #1 first)
----------------------------------------
Please let me know if you still have this problem after you try all the resolutions in the above link.
Thank you very much.