09-19-2008, 10:31 AM
This new US version is 2-way audio capable, but you will have to buy the microphone and its power supply separate. It comes with the following connectors:
1.) Audio-in and Audio-out
2.) Video out
3.) Power connector (Camera power adapter is provided)
4.) Network connector (RJ45)
5.) Alarm-in and Alarm-out connectors.
The 2-way audio setup is straight forward, once software is installed and you have video streaming, make sure the "Speaker" and "Mic" do not have red marks by clicking them. Then right click on the video screen and select "Enable Audio". You may also raise the Volume.
If there's a router involved, you should forward port 80 for remote viewing. You may find out the IP address of the D611E IP camera by opening the Zavio "intellegent IP Insataller" from the Windows Start menu, or if UPnP is enabled you should see System Tray notification Icon. Just double click it. For more details refer to the manual that comes with camera.Click here to downlaod user manual.
1.) Audio-in and Audio-out
2.) Video out
3.) Power connector (Camera power adapter is provided)
4.) Network connector (RJ45)
5.) Alarm-in and Alarm-out connectors.
The 2-way audio setup is straight forward, once software is installed and you have video streaming, make sure the "Speaker" and "Mic" do not have red marks by clicking them. Then right click on the video screen and select "Enable Audio". You may also raise the Volume.
If there's a router involved, you should forward port 80 for remote viewing. You may find out the IP address of the D611E IP camera by opening the Zavio "intellegent IP Insataller" from the Windows Start menu, or if UPnP is enabled you should see System Tray notification Icon. Just double click it. For more details refer to the manual that comes with camera.Click here to downlaod user manual.