10-13-2008, 03:29 PM
Hi all,
New GV 600-4 , v4 in a clean Dell GX270:
The system runs well, but the camera windows have jitter in them. The effect is that the top of the camera's display shifts while the bottom of that display is stable.
One (of 4) is stable,
the second has an occasional twitch on the top of the display,
and the other two are more unstable.
The effect is that the top of the camera's display shifts while the bottom of that display is stable.
It is enough that the motion is triggered when they twitch.
It is independent of the camera, as I have swapped them and the artifact follows the input channel and not the camera.
Any ideas or suggestions?
Thanks
Bo
New GV 600-4 , v4 in a clean Dell GX270:
The system runs well, but the camera windows have jitter in them. The effect is that the top of the camera's display shifts while the bottom of that display is stable.
One (of 4) is stable,
the second has an occasional twitch on the top of the display,
and the other two are more unstable.
The effect is that the top of the camera's display shifts while the bottom of that display is stable.
It is enough that the motion is triggered when they twitch.
It is independent of the camera, as I have swapped them and the artifact follows the input channel and not the camera.
Any ideas or suggestions?
Thanks
Bo