05-26-2009, 05:08 PM
NVRmini setup overview (version 1.2)
Before you begin setting up NVRmini, please make sure you have the following items:
1.) Installation CD
2.) Power cord
3.) RJ45 cable
4.) Hard drives
5.) Screw driver
6.) A computer with network access
Setting up NVRmini
1.) Plug in the power cord
2.) Connect NVRmini to the network with a RJ45 cable
3.) Physically install the hard drives
4.) Insert the NVRmini installation CD into the computer's CD or DVD drive
5.) Run setup, select [Advanced Setup] and follow the instructions and manually assign NVRmini a static IP address (ex. [192.168.0.168])and enter a desired administrator password
6.) Once the installation is finished, run [Internet Explorer] and type in NVRmini's IP address you assigned (ex. [192.168.0.168] and login with admin account
Before you begin setting up NVRmini, please make sure you have the following items:
1.) Installation CD
2.) Power cord
3.) RJ45 cable
4.) Hard drives
5.) Screw driver
6.) A computer with network access
Setting up NVRmini
1.) Plug in the power cord
2.) Connect NVRmini to the network with a RJ45 cable
3.) Physically install the hard drives
4.) Insert the NVRmini installation CD into the computer's CD or DVD drive
5.) Run setup, select [Advanced Setup] and follow the instructions and manually assign NVRmini a static IP address (ex. [192.168.0.168])and enter a desired administrator password
6.) Once the installation is finished, run [Internet Explorer] and type in NVRmini's IP address you assigned (ex. [192.168.0.168] and login with admin account