05-27-2009, 09:00 AM
Our main console allow you to set up several hard disk drives as the storage location. When the first hard disk is almost full (the capacity is less than 800MB on system disks or 100MB on non-system disks), main console will try to find a second storage with enough capacity.
If no more capacity is available, main console will start recycling if auto-recycling is enabled.
If auto-recycling is not enabled, recording will stop.
Please go to [Main Console]->[Config]->[General]->[Storage Location] to modify your settings.
If no more capacity is available, main console will start recycling if auto-recycling is enabled.
If auto-recycling is not enabled, recording will stop.
Please go to [Main Console]->[Config]->[General]->[Storage Location] to modify your settings.