DVR Security Forum

DVR Security Forum > IP cameras and NVR > Mobotix IP Cameras > What pan and tilt heads are currently supported by MOBOTIX cameras?
Full Version: What pan and tilt heads are currently supported by MOBOTIX cameras?
You're currently viewing a stripped down version of our content. View the full version with proper formatting.

MobotixUSA

06-05-2009, 12:05 PM
Pan and tilt heads are always manoeuvred via the serial interface using control sequences. These control sequences can then, for example, be configured as soft buttons provided the camera is to be freely controlled by the user. As a consequence, pan and tilt heads controlled via an RS-232 interface and that recognize the control commands can be used.

The following pan and tilt heads are currently employed:

MANUFACTURER --- MODELS
Provitek --- all models
Videor-Technical --- VPT-42RSVT-PO I
Videotronic --- SN-15AH/PPHS/ALU
DVR Security Forum > IP cameras and NVR > Mobotix IP Cameras > What pan and tilt heads are currently supported by MOBOTIX cameras?
Reference URL's