06-26-2009, 09:30 AM
First, wire the camera with network cable and power adapter or use a POE adapter if the camera supports it. Connect network cable to one computer. Install Intelligent IP Installer into this computer. Open Intelligent IP Installer from Windows Start Menu and it should find the new camera. See this picture attachment.
[attachment=95]
You can login to the camera page on Internet Explorer and set it up to match your network.
If the camera supports Wi-Fi you are also able to assign wireless IP address. Remember there are 2 different IP addresses: One for wireless and another for wired Ethernet, so do not use both.
Zavio cameras come with free Console close to NUU's Main Console - install it then search cameras that you setup earlier to add them.
[attachment=95]
You can login to the camera page on Internet Explorer and set it up to match your network.
If the camera supports Wi-Fi you are also able to assign wireless IP address. Remember there are 2 different IP addresses: One for wireless and another for wired Ethernet, so do not use both.
Zavio cameras come with free Console close to NUU's Main Console - install it then search cameras that you setup earlier to add them.