10-13-2009, 10:23 AM
Installing Two Cards (GV-600, GV-650, GV-800)
You can install two video capture cards of the same model for a total of 32 channels. For example, 2 x GV-650 Cards (16 channels) = 32 channels.
You can also implement two video capture cards of different channels. For example, GV-650 Card (12 channels) + GV-650 Card (16 channels) = 28 channels.
Packing List
1. GV-600/650/800 Card x 2
2. Black and White D-Type Cable for Video and Audio x 2
3. Blue D-Type Cable for Video x 2
4. Hardware Watchdog Jumper Wire x 1
5. Software DVD x 1
6. Feature Guide x 1
7. Installation Guide x 1
Rules to Use Two Cards
GV Video Capture Cards have two interface types: PCI and PCI Express (PCI-E). When you install two video capture cards, ensure they are installed in the right slots as instructed in the following tables.
1. The V3.20 (and later) Cards or the combination of V3.20 and V4.20 (and later) Cards do not support two cards.
2. For GV-600 (V4) Cards, it is required to use two PCI slots.
3. For GV-650 (V4) Cards, you can use two PCI slots, two PCI Express slots, or the combination of PCI and PCI Express slots.
4. For GV-800 (V4) Cards, it is required to use two PCI Express slots, or the combination of PCI and PCI Express slots.
Note:
1. GV-800_4A Card does not support two cards.
2. PCI-E GV-650 (V4) and GV-800 (V4) Cards have x1 interface which can be inserted into the PCI Express x1, x4, x8 or x16 slot.
Connections
1. Master and Slave Cards
Master Card is the GV Video Capture Card with 1-16 channels and Slave Card is the one with 17-32 channels. Normally, the card attached to the lower PCI slot number will act as Master, and the card attached to the higher PCI slot number will act as Slave.
2. For the user of two GV-600 Cards
Two GV-600 Cards only support two audio channels. Connect microphones to Audio 1 connector of the Master Card, and Audio 5 connector of the Slave Card.
3. For the user of two GV-650 Cards
Two GV-650 Cards only support four audio channels. Connect microphones to Audio 1 and Audio 2 connectors of the Master Card, and Audio 5 and Audio 6 connectors of the Slave Card.
4. Hardware Watchdog Connection
Connect the supplied Hardware Watchdog Jump Wire to the Master Card.
5. Accessory Card Connections
GV-NET/IO Card: Connect the card only to the Master Card. GV-Loop Through Card: Connect the card for each video capture card. GV-Multi Quad Card: Only connect one card to any of two video capture
cards.
Specification
Minimum System Requirements
Note:
1. The hard disk space required to install GV-System must be at least 1 GB.
2. Currently GV Video Capture Cards are not compatible with VIA-series and ATI-series chipset motherboards, and 64-bit Windows operating system.
You can install two video capture cards of the same model for a total of 32 channels. For example, 2 x GV-650 Cards (16 channels) = 32 channels.
You can also implement two video capture cards of different channels. For example, GV-650 Card (12 channels) + GV-650 Card (16 channels) = 28 channels.
Packing List
1. GV-600/650/800 Card x 2
2. Black and White D-Type Cable for Video and Audio x 2
3. Blue D-Type Cable for Video x 2
4. Hardware Watchdog Jumper Wire x 1
5. Software DVD x 1
6. Feature Guide x 1
7. Installation Guide x 1
Rules to Use Two Cards
GV Video Capture Cards have two interface types: PCI and PCI Express (PCI-E). When you install two video capture cards, ensure they are installed in the right slots as instructed in the following tables.
1. The V3.20 (and later) Cards or the combination of V3.20 and V4.20 (and later) Cards do not support two cards.
2. For GV-600 (V4) Cards, it is required to use two PCI slots.
3. For GV-650 (V4) Cards, you can use two PCI slots, two PCI Express slots, or the combination of PCI and PCI Express slots.
4. For GV-800 (V4) Cards, it is required to use two PCI Express slots, or the combination of PCI and PCI Express slots.
Note:
1. GV-800_4A Card does not support two cards.
2. PCI-E GV-650 (V4) and GV-800 (V4) Cards have x1 interface which can be inserted into the PCI Express x1, x4, x8 or x16 slot.
Connections
1. Master and Slave Cards
Master Card is the GV Video Capture Card with 1-16 channels and Slave Card is the one with 17-32 channels. Normally, the card attached to the lower PCI slot number will act as Master, and the card attached to the higher PCI slot number will act as Slave.
2. For the user of two GV-600 Cards
Two GV-600 Cards only support two audio channels. Connect microphones to Audio 1 connector of the Master Card, and Audio 5 connector of the Slave Card.
3. For the user of two GV-650 Cards
Two GV-650 Cards only support four audio channels. Connect microphones to Audio 1 and Audio 2 connectors of the Master Card, and Audio 5 and Audio 6 connectors of the Slave Card.
4. Hardware Watchdog Connection
Connect the supplied Hardware Watchdog Jump Wire to the Master Card.
5. Accessory Card Connections
GV-NET/IO Card: Connect the card only to the Master Card. GV-Loop Through Card: Connect the card for each video capture card. GV-Multi Quad Card: Only connect one card to any of two video capture
cards.
Specification
Minimum System Requirements
Note:
1. The hard disk space required to install GV-System must be at least 1 GB.
2. Currently GV Video Capture Cards are not compatible with VIA-series and ATI-series chipset motherboards, and 64-bit Windows operating system.