03-12-2010, 12:44 PM
Access to the Internet
a. Internet connectivity of the IP camera can be established by inputting the cameras IP information within the
Information section.
(Please go to Setting → Basic → Network→ Information)
b. Internet Connectivity of the IP Camera can be established through PPPoE (Point-to-Point Protocol over the
Ethernet) by inputting the username and password from your Internet Service Provider (ISP) within the PPPoE section.
(Please go to Setting → Basic → Network→ PPPoE)
Note 1: Please reboot the IP Camera, after changing the PPPoE settings.
Note 2: Please turn on the DDNS and IP Notification function when using the PPPoE function.
c. Internet Connectivity of the IP Camera can be established if your router is UPnP (Universal Plug and Play) enabled. The IP camera is automatically detected and added to “My Network Places” on your computer. Please note that only Home Routers manufactured after 2006 support the UPnP function.
c1. If your router is a UPnP Internet Gateway Device (IGD), turn on the UPnP function within the UPnP section.
(Please go Setting → Basic → Network→ UPnP)
Note: If you turn on the UPnP Port Forwarding function, RTSP (Real Time Streaming Protocol) Port
information will change to the illustrated value below.
c2. If your router is not a UPnP Internet Gateway Device, please setup Port Forwarding or Port Mapping
Note 1: Home Routers manufactured before 2006 do not support UPnP IGD function.
Note 2: Enterprise Routers do not support UPnP IGD function.
[/u]
a. Internet connectivity of the IP camera can be established by inputting the cameras IP information within the
Information section.
(Please go to Setting → Basic → Network→ Information)
b. Internet Connectivity of the IP Camera can be established through PPPoE (Point-to-Point Protocol over the
Ethernet) by inputting the username and password from your Internet Service Provider (ISP) within the PPPoE section.
(Please go to Setting → Basic → Network→ PPPoE)
Note 1: Please reboot the IP Camera, after changing the PPPoE settings.
Note 2: Please turn on the DDNS and IP Notification function when using the PPPoE function.
c. Internet Connectivity of the IP Camera can be established if your router is UPnP (Universal Plug and Play) enabled. The IP camera is automatically detected and added to “My Network Places” on your computer. Please note that only Home Routers manufactured after 2006 support the UPnP function.
c1. If your router is a UPnP Internet Gateway Device (IGD), turn on the UPnP function within the UPnP section.
(Please go Setting → Basic → Network→ UPnP)
Note: If you turn on the UPnP Port Forwarding function, RTSP (Real Time Streaming Protocol) Port
information will change to the illustrated value below.
c2. If your router is not a UPnP Internet Gateway Device, please setup Port Forwarding or Port Mapping
Note 1: Home Routers manufactured before 2006 do not support UPnP IGD function.
Note 2: Enterprise Routers do not support UPnP IGD function.
[/u]